> For the complete documentation index, see [llms.txt](https://docs.wingbits.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.wingbits.com/hyfix/hyfix-troubleshooting.md).

# HYFIX troubleshooting

Start with [Station troubleshooting](https://docs.wingbits.com/general-help/stations/station-troubleshooting.md) on the main docs. Those checks only need the dashboard. Come back here for checks on the HYFIX WB200 or MGW310 itself.

After any fix, allow about 20 minutes for your station to show "Online" again.

### Where to look

* The dashboard: your station's "Statistics" and "Heartbeats" tabs. Open your station from [My Stations](https://wingbits.com/dashboard/stations).
* The HYFIX Web UI: your station's own settings page, where you change Wi-Fi and update firmware. Open a browser on the same network and enter your station's IP address. See [Get the IP of the device](https://docs.wingbits.com/hyfix/hyfix-hardware-setup.md#get-the-ip-of-the-device). If your station is in AP mode, join the network it broadcasts and go to 192.168.10.1.
* Station Monitor: a live diagnostics page on your station at `http://<your-station-ip>:8088`, from the same network.

### 1. Check the lights

There are three lights on the side: POWER, PPS and Status. A working station shows POWER solid, PPS flashing and Status solid.

| What you see                         | What it means                                                | What to do                                                                                      |
| ------------------------------------ | ------------------------------------------------------------ | ----------------------------------------------------------------------------------------------- |
| POWER off                            | No power.                                                    | Check the power supply and that the cable is firmly in at both ends.                            |
| Status flashing once a second        | AP mode. The station couldn't join your network and gave up. | A network problem. Go to step 4.                                                                |
| Status flashing three times a second | Trying to connect.                                           | Wait a couple of minutes. Solid means it connected.                                             |
| Status solid                         | Connected to your network.                                   | Go to step 2.                                                                                   |
| PPS off                              | No GPS fix yet.                                              | Give it a few minutes after a cold start. If it stays off, check the antenna's view of the sky. |

<figure><img src="https://3186240306-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fnbjjg7nGERQyZZZcAh7D%2Fuploads%2Fgit-blob-20471bee6b9d21285748896790622be6342ef1ae%2Fgoogle-5d26c8d406.jpg?alt=media" alt=""><figcaption><p>LED status key</p></figcaption></figure>

<figure><img src="https://3186240306-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fnbjjg7nGERQyZZZcAh7D%2Fuploads%2Fgit-blob-13ced4445ca097ecc695584ac11c95ee53494d44%2Fgoogle-d0ab1595f7.jpg?alt=media" alt=""><figcaption><p>HYFIX LED statuses</p></figcaption></figure>

{% hint style="warning" %}
A solid Status light only means the station reached your network, not Wingbits. Old firmware or a blocked port can look perfectly healthy here, so don't skip step 2.
{% endhint %}

### 2. Check your firmware

Out of date firmware is one of the most common reasons a HYFIX goes quiet, and restarting won't fix it.

Find your version on the "Statistics" tab ("Firmware Version"), or in the HYFIX Web UI under "Device Info". It looks like `MGW310-v2.0.51` or `WB200-v2.0.51`.

* v2.0.36 or later: [update it yourself](https://docs.wingbits.com/hyfix/hyfix-firmware-update.md) from the HYFIX Web UI. Only choose the entry for your model. Your station should check in straight after and go green within about 20 minutes.
* Older than v2.0.36: this can't update itself. Contact support using the chat icon at the bottom right of this page, or email <support@wingbits.com>, with your station ID and firmware version, and we will arrange an update.

### 3. Power cycle it

1. Unplug the station at the wall.
2. Wait 30 to 60 seconds.
3. Plug it back in.

{% hint style="danger" %}
It has to be a real power off. A reboot from a menu doesn't reset the GPS, which is one of the main things this fixes.
{% endhint %}

Check the "Heartbeats" tab shortly after. A ↻ on the newest row means the restart worked. If no heartbeat arrives at all, go to step 4.

### 4. Network problems

#### Your network changed

A new router, Wi-Fi name or password means the station can't rejoin and falls back to AP mode.

1. Join the Wi-Fi network your station is broadcasting.
2. Go to `192.168.10.1` in a browser.
3. Enter your new Wi-Fi name and password.

See the [HYFIX FAQ](https://docs.wingbits.com/hyfix/hyfix-faq.md) for more on AP mode.

#### Your Wi-Fi is weak

The station connects and drops again, which shows as red rows on the "Heartbeats" tab. A wired Ethernet connection is the best fix.

#### Something is blocking us

Your station needs outbound access on ports 443, 123, 53, 2201 and 2500. This mostly affects business, school and hotel networks, or routers with strict firewall or parental controls. Use the connectivity tests in step 5 to check.

### 5. Check Station Monitor

From a device on the same network, go to `http://<your-station-ip>:8088`. The page refreshes itself.

* "CONNECTIVITY TESTS" shows a tick or a failure for each of our servers. The important one is `ingest.wingbits.com` on port 443. If ours fail but `www.google.com` passes, your network is blocking us.
* "GPS TIME" should match the real time and tick forward. If it is frozen or hours out, the GPS is faulty. Try step 3, and contact us if it continues.
* "VISIBLE AIRCRAFT" lists what your station can see. An empty list means an antenna problem.
* "GPS COORDINATES" shows where your station thinks it is. Compare it to your claimed location.

{% hint style="success" %}
If you contact us, click "Download Diagnostics" at the top of this page and attach the file. It saves a lot of back and forth.
{% endhint %}

### Still stuck?

Contact support with the chat icon at the bottom right of any page, and include your station ID, model, firmware version, what the three lights are doing, what you have tried, and the Station Monitor diagnostics file.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.wingbits.com/hyfix/hyfix-troubleshooting.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
